Epilog FiberMark S2 Firmware and Driver Downloads

Epilog Software Suite 2.2.5 (2/1/2021)

• Everything you need to run your FiberMark S2 system
• Installs the Epilog Job Manager and the Epilog Laser Dashboard

バージョン 2.2.5リリース ノート

• バグ修正と改善

- For more information on the Job Manager, click here.
- Download Software Suite install and use instructions.

注 : Remove previous version of Epilog Job Manager and Epilog Software Suite before installation! (Go to Control Panel > Programs and Features and remove the software.)

Download 64-bit (x64) Version Download 32-bit (x86) Version

最小要件：

• Windows 7, Windows 8.1, or Windows 10
• Operating system should have all system updates before installation
• Support for OpenGL 3.0 (or higher) or OpenGL 2.0ES (or higher)
• 4GB RAM or more
• 2 processor cores or more
• Processor can be any Intel i3/i5/i7, AMD Ryzen 3/5/7, AMD A4/A6/A8/A10/A12/FX
• Integrated gigabit ethernet required for Fusion M2 vision system. Fusion Pro/Edge does not have the same requirement, but is nice to have.

Recommended Specifications:

• 8GB RAM or more
• 4 processor cores or more
• Processor can be any Intel i5/i7, AMD Ryzen 5/7, AMD A6/A8/A10/A12/FX