Epilog Fusion Pro Laser Machines
Introducing the new Epilog Fusion Pro. 5G acceleration and 165 IPS engraving speeds provide the fastest engraving in the industry. And the IRIS™ Camera Positioning system allows you to precisely place your artwork on screen in seconds.
- Fusion Pro 32: 32” x 20” (812 x 508 mm) work area
- Fusion Pro 48: 48” x 36” (1219 x 914 mm) work area
- Wattages:
- CO2: 50, 60, 75, or 120 watts
- Fiber: 30 or 50 watts
- Dual: Configure your laser with both CO2 and Fiber sources
Features: Benefits of Epilog’s Fusion Pro Laser System
The Fusion Pro laser engraving and cutting machines from Epilog are our top-of-the-line laser systems and combine a large work area with the latest technological features, including:
より広い作業域でハイスピード彫刻
The Fusion Pro’s 165 IPS engraving speed and 5G acceleration combine to provide the fastest engraving in the industry.
IRIS™ Camera Positioning
Overhead cameras provide an accurate picture of the working area for accurate artwork placement, and a camera at the lens allows the system to find preprinted registration marks.
Touch Screen at the Laser
Select between jobs, change settings, and more right from the easy-to-use touch screen interface right at the laser. Rerun jobs at the touch of a button.
米国で開発製造
Proudly designed, engineered, and manufactured in our Golden, CO headquarters at the base of the Rocky Mountains.
会社のネットワークにレーザーを接続
The Fusion Pro features built-in Ethernet, USB, and a new wireless connection for more options for networking your laser.
SAFEGUARD™ Features
Keep the mechanics of your laser machine cleaner than ever before with side bellow enclosures, a fully covered x-axis assembly, and covered lens assembly.
Air Assist and Compressor
The air assist removes heat and combustible gases from the cutting surface for a cleaner cut. A built-in air compressor provides air directly to the work surface.
Table Choices
On the Fusion Pro 48 mix and match your table across the bed with optional slat and gridded cutting tables.
Radiance™ Beam Enhancing Optics
No additional, expensive lens package needed for the highest resolution engraving across the entire table.
Epilog による CO2 Waveguide レーザー管
レーザー管を金属のみで作る設計により、ビーム品質が高まり、寿命が長く、リチャージのコストが抑えられます。
1 GB Memory in the Machine
Improve job management and data integrity with 1GB of RAM in both Fusion Pro systems. Save your most run jobs right at the laser.
Long-Life Steel Bearing
A dual block design provides the most rigidity and reduced vibration without the inevitable wobble and replacement of plastic bearings.
アクセサリ
デュアル ソース オプション : CO2 とファイバー
Are you looking for the material versatility of a CO2 laser in addition to the direct metal etching of a fiber laser? Add on the dual source option to your Fusion Pro by choosing both a CO2 laser (50, 60, or 75 watts) and a fiber laser (30 or 50 watts) to work with a wider range of materials.
Rim-Style Rotary Attachment
Available for the Fusion Pro, the Rim-Style rotary attachment adds the ability to engrave bottles, glasses, flashlights, or any other cylindrical item. The Fusion Pro rotary attachment is as easy to setup as placing your product on the rotary, raising or lowering the scissor lift to level the engraving area, and printing to the laser.
3-Jaw Chuck ロータリー アタッチメント
The Fusion Pro 3-Jaw Chuck mechanically clamps a cylinder or oddly-shaped, non-cylindrical item in place as the laser engraves. It is the perfect accessory when your engraving requires extremely precise positioning on your cylindrical items.
PhotoLaser Plus ソフトウェア
PhotoLaser Plus takes photo engraving with your Epilog Fusion Series laser to the next level by easily processing photos for engraving on all types of materials. Epilog Laser has partnered with CADLink to bring you the industry’s best photo processing software: PhotoLaser Plus. The easy-to-use software interface and powerful photo processing tools allow you to create the highest-quality photo engravings in the industry.
オプションのレンズ
1.5” Lens: Highest-Resolution Engraving
Although the standard 2” lens provides amazing detail, our 1.5” lens assembly has been designed for the highest-resolution engraving and etching of extremely small fonts.
4.0” Lens: Cutting Thicker Materials and Inside Deep Areas
The 4” lens produces a focused beam over a longer vertical distance, which makes it ideal when engraving within a recessed area of a product, such as inside a bowl or plate. The lens is also used for cutting through very thick materials.
Cone Lens: Deep cutting with the Laser
The cone design pushes the stream from the Air Assist directly down through the cut, rather than over the surface of the engraving material. This provides even better reduction of laser flare-ups and better edge quality.
Cutting Pin Table
ピン テーブルには、穴の間隔が 1 インチ (25.4 mm) 刻みのテーブルのグリッドに沿ってどこにでも配置できる可動ピンが組み込まれています。可動ピンを使用すれば、レーザーで切断しない場所で切断する素材を持ち上げて支持できるため、背面での反射を防ぐことができます。テーブルを使用すれば、ピンを配置して通常であれば切断パターンから欠落するパーツを支持することもできます。便利な取り外し可能定盤により、ピン テーブルを取り外さなくても小さいパーツを簡単に掃除できます。
Epilog Fusion Pro Technical Specifications
| Fusion Pro 32 | Fusion Pro 48 | |
|---|---|---|
| 作業域 | 32” x 20” (812 x 508 mm) |
48” x 36” (1219 x 914 mm) |
| Maximum Z-Depth | 12.25” (311 mm) | 12.25” (311 mm) |
| Laser Tube Wattage |
CO2 - 50, 60, 75, or 120 watt
Fiber - 30 or 50 watt
|
|
| ソフトウェア | Epilog Laser Software Suite: Laser Dashboard & Epilog Job Manager | |
| メモリ | Multiple files up to 1 GB. Engrave any file size. | |
| 操作モード | Optimized Raster, Vector, and Combined Modes | |
| モーション コントロール | High-speed, continuous-loop, brushless DC servo motors using rotary encoding technology for precise positioning | |
| X 軸ベアリング | Ground & polished stainless steel, Teflon-coated, self-lubricating bearings. Dual blocks on X-axis for greater rigidity | |
| ベルト | Advanced B-Style Kevlar belts (x-axis) and steel cord (y-axis) | |
| 解像度 | Fully-flexible and user-controlled from 75 – 1200 dpi | |
| Speed and Power | Computer-controlled in .001 increments up to 100% | |
| プリント インターフェイス | 10Base-T Ethernet, USB, or Wireless connection. Windows 7/8/10 compatible | |
| 寸法 (W x D x H) | 54.6” x 34.2” x 42" 1387 x 869 x 1067 mm |
70.6” x 51.3" x 42.75" 1794 x 1304 x 1086 mm Pedestal removed: 34” H (863 mm) |
| 重量 | 400 lbs (182 kg) | 500 lbs (227 kg) |
| 電気 | 240 volts, 50 or 60 Hz, single phase | |
| 換気 | 650 CFM (1104 m3/hr) external exhaust to the outside or internal filtration unit required. Three output ports, 4” (102 mm) diameter. | |
| Exhaust Ports | One output port 4” (102 mm) |
Two output ports 4” (102 mm) |
| Vacuum Table Port | Additional port for dedicated exhaust through table, 4” (102 mm) | |
| 安全 | Class 2 Laser Product – 1 mW CW Maximum 600 – 700 nm | |
Epilog Fusion Pro Material Compatibility
詳細情報をリクエスト
パンフレット、サンプルのお申し込み
パンフレットやサンプルを受け取り、当社やお近くの代理店からより詳細情報を入手する。
2019 © Epilog Laser. ALL Rights Reserved. プライバシー ポリシー | ディストリビュータの検索 | サイトマップ